Cherry Clip-in Stabilizers + Geon Balanced Wires

Cherry Clip-in Stabilizers paired with Geon Balanced Wires, featuring PCB clip-in housings and balanced wires in 2U, 6.25U, and 7U sizes.

Designer Studio DS Adaptive PCB Mount Stabilizers V2

Designer Studio DS Adaptive PCB Mount Stabilizers V2 are PCB-mounted stabilizers with elastic support inside the stem, FR4 shims, and Teflon bottom-out pads. The set includes 2U, 6.25U, and 7U wires.

Designer Studio DS Adaptive Plate Mount Stabilizers

Designer Studio DS Adaptive Plate Mount Stabilizers use elastic polymer support inside the stem to restrain wire movement. They have full POM housings and support 6.25U or 7U spacebars.

Durock V3 Stabilizers Screw-in

Durock V3 Stabilizers Screw-in are PCB-mounted stabilizers with screw-in mounting, nylon polymer housings and stems, and updated stems designed for flexible wire tolerance.

TX AP Long Pole Plate Mount Stabilizers

TX AP Long Pole Plate Mount Stabilizers are Rev 4 plate-mount long-pole stabilizers with a 1mm stem and 3.5mm stroke. They support both 6.25U and 7U spacebars.

TX AP Long Pole Screw-in Stabilizers

TX AP Long Pole Screw-in Stabilizers are Rev 4 PCB screw-in stabilizers with long-pole, 1mm stems and support 6.25U and 7U spacebars.

TX AP Long Pole Stabilizers

TX AP Long Pole Stabilizers are clip-in stabilizers designed to complement long-pole switches by limiting travel. The AP revision improves housing and stem fit, reduces wobble and noise, and is available in Base and 2U types.

TX AP Long Pole Stabilizers Top Clip-in

TX AP Long Pole Stabilizers Top Clip-in are PCB-mounted stabilizers with a top clip-in design for long-pole switches, supporting both 6.25U and 7U spacebars.

TX AP Screw-in Stabilizers

TX AP Screw-in Stabilizers are Rev 4 PCB screw-in stabilizers with a doubleshot stem and POM outside with TPU and POM inside; they support 6.25U and 7U spacebars.

TX AP Stabilizers Rev 4

TX AP Stabilizers Rev 4 are clip-in stabilizers by TX Keyboard, with an improved housing and stem, doubleshot stem, and stabilizer stoppers. They support both 6.25U and 7U spacebars and are offered in Base and 2U types.

TX AP Stabilizers Top Clip-in

TX AP Stabilizers Top Clip-in use TX’s AP construction with a top clip-in PCB mount and support both 6.25U and 7U spacebars.

Aurora Series WS Stabilizers

Aurora Series WS Stabilizers are Wuque Studio PCB-mount, screw-in stabilizers recolored for the Ikki68 Aurora Round 2. They are offered for 1.2mm and 1.6mm PCBs.

Cherry PCB Mount Screw in Stabilizers

Cherry PCB-mount screw-in stabilizers are available as 60 Set or 104 Set configurations, with 6.25U and OEM 7U spacebar wire options.

Durock Stabilizers V2

Durock Stabilizers V2 are PCB-mount screw-in keyboard stabilizers with pre-clipped stems and wire hooks designed to prevent wire popping.

Gateron PCB Mount Clip in Stabilizers

Gateron PCB Mount Clip in Stabilizers include four 2U units, one 6.25U unit, and a 7U wire.

Gateron V2 Stabilizers

Gateron V2 screw-in stabilizers for 1.6mm PCBs, supplied with 2u, 6.25u, and 7u wires; the Black/Silver version is intended for short-travel/long-pole MX switches.